POSTHHERMO EXTRA
Adhesive for heat-insulator

COMPOSITION:
Posthhermo Extra is a styrene-butadiene based adhesive, contains pigments,fillers and additives.

APPLICATIONS:
Posthhermo Extra is suitable for bonding heat-insulator foams, concrete, plaster, gypsum, wood, chipboard, aluminium, and surfaces like these.

SAFETY ASPECTS:
Non-toxic and non-flammable.

STORAGE:
Store in dry place protect from frost and direct sunlight. Optimal storage temperature: +5-40°C.
Shelf-life: 12 months, in original close container.

TECHNICAL INFORMATIONS:
Appearance: whitish, homogenous, thick liquid dispersion with characteristic
mild odour.
Viscosity:
(Brookfield ;7/10) 8 - 18 Pas.
Solids: approx. 54%
Density: approx. 1,2g / cm3
Minimum gluing
temperature: 15°C
Open time(at 20°C): 15 minutes

INSTRUCTION FOR USE:
Posthhermo Extra have to be stirred up before using. It can be thinned with water(max. 10%), but it is practical to use without thinning.Clean the equipment with water before the adhesive dries.
Apply Possthermo Extra using brush, spatula, roller, or machine roller.
To obtain an ideal adhesive strength is necessary to provide a clean, non-dusting, tightly fitting surface.
Do not use the adhesive, when the temperature of workplace, adhesive and workpiece are below 5°C.
Bonded joints reach the final strength on 25°C after 24 hours drying.
If there is a porous surface coating may be necessary.

Packaging: 1 and 5 kilograms plastic bucket

Data, application fields,processing technologies in this technical data sheet are on the basis of our best technical knowledge, but of course this does not contain local conditions in complience with detailed application conditions. Our declarations in this respect are informative!

Back to products        Print this page